N_One Wireless Broadband Router
• The Clear Log button will restart the Log, while the Re- fresh button will update the messages shown on screen.
Buttons
Connect | If not connected, establish a connection to Telstra Big Pond. |
|
|
Disconnect | If connected to Telstra Big Pond, terminate the connection. |
|
|
Clear Log | Delete all data currently in the Log. This will make it easier to |
| read new messages. |
Refresh | Update the data on screen. |
|
|
Connection Details - SingTel RAS
If using the SingTel RAS access method, a screen like the following example will be displayed when the "Connection Details" button is clicked.
Figure 27: Connection Details - RAS
Data - RAS Screen
Internet
RAS Plan | The RAS plan (connection speed) currently used. |
|
|
Physical Ad- | The hardware address of this device, as seen by remote |
dress | devices on the Internet. (This is different to the hardware |
| address seen by devices on the local LAN.) |
IP Address | The IP Address of this device, as seen by Internet users. This |
| address is allocated by your ISP (Internet Service Provider). |
Network Mask | The Network Mask associated with the IP Address above. |
|
|
Default Gateway | The IP Address of the remote Gateway or Broadband router |
| associated with the IP Address above. |
DNS IP Address | The IP Address of the Domain Name Server which is currently |
|
|
46
