LevelOne WBR-6000 user manual Incoming Rules Inbound Services, Data Incoming Rules Screen

N_One Wireless Broadband Router

Incoming Rules (Inbound Services)

This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.

Figure 36: Inbound Services Screen

Data - Incoming Rules Screen

Inbound Services

Service

Action

Send to LAN Server

WAN Users

Select the desired Service. This determines which packets are covered by this rule. If necessary, you can define a new Service on the "Services" screen, by defining the protocols and port num- bers used by the Service.

Select the desired action for packets covered by this rule:

•ALLOW always

•ALLOW by schedule, otherwise Block

•BLOCK always

•BLOCK by schedule, otherwise Allow

Note:

•Any inbound traffic which is not allowed by rules you create will be blocked by the Default rule.

•BLOCK rules are only useful if the traffic is already covered by an ALLOW rule. (That is, you wish to block a sub-set of traffic which is currently allowed by another rule.)

•To define the Schedule used in these selections, use the "Schedule" screen.

Select the PC or Server on your LAN which will receive the in- bound traffic covered by this rule.

These settings determine which packets are covered by the rule, based on their source (WAN) IP address. Select the desired

61