N_One Wireless Broadband Router
Rear Panel
10/100BaseT LAN connec- tions
WAN port (10/100BaseT)
Reset Button
Power port
Figure 3: Rear Panel
Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.
Note:
Any LAN port on the Wireless Broadband Router will automati- cally function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable.
Connect the DSL or Cable Modem here. If your modem came with a cable, use the supplied cable. Otherwise, use a stan- dard LAN cable.
This button has two (2) functions:
•Reboot. Press and hold the Reset Button for five (5) seconds and released, the Wireless Broadband router will reboot (restart).
•Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
zPower ON, push and hold the reset button for 10 sec.
Release the Reset Button. The Wireless Broadband router will reboot and now is using the factory default values.
Connect the supplied power adapter here.
8
