Installation 1 Installation
Controls and Indicators
The Front Panel
1. ON/OFF
ON/OFF alternately puts the
2.Input Selection Pressing any of these but- tons (VCR 1, VCR 2,
3. REC/ZONE 2
Press and hold to activate Zone 2 control with the On/ Off, Input Selector, Volume and Mute buttons.
Some sources are blocked because of the potential for feedback loops. By default these are TAPE and VCR 1. If a blocked source is se- lected, a message is dis- played. This source blocking can be changed in the INPUT CONFIG menu.
4. EFFECT
Displays the current effect, then steps through the avail- able effects.
5. BYPASS
Engages the
6. MUTE
Attenuates the main audio outputs, lights a red LED, and displays a screen message to indicate mute is engaged. The attenuation level can be set in the Setup: Output Lev- els menu.
7.IR Receiver and LED The IR receiver has an asso- ciated activity LED that lights green when valid IR signals are received, and an LED that lights red to indicate clipping at the inputs. An IR input jack is available on the rear panel for receipt of
8. Display
A 2x20 backlit LCD displays the result of user action and the current status. This dis- play can be turned off with the remote control.
9. VOLUME
Provides volume adjustment of the main outputs. Screen displays show a volume bar and level in dB unless the front panel display is turned off with the remote control.
1
