Lexicon Lexicon Part #070-13234 owner manual Display Adjustment, The Video On-ScreenDisplay

DC-1 Version 4 Digital Controller

System Configuration

Depending on the location of the DC-1 in your room, you may need to adjust the front panel display contrast for optimum viewing. To do this, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to highlight the Display Adjust Menu. Press ▼ to select

FRONT PANEL DISPLAY.

To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT, and ▲ or ▼ to set the contrast of the display to its maximum as seen from your listening position.

If you want to turn the front panel display off, use SELECT to highlight STATUS, then use ▲ or ▼ to select ALWAYS OFF. With software Version 4, you can select 2 SECONDS which will cause the display to shut off automatically two seconds after a command is received.

Press DONE twice to return to the main menu.

In addition to the front-panel display, the DC-1 contains a character genera- tor for a video overlay display on monitors. Since the on-screen display is capable of showing the full menu of options available at any point, calibra- tion of the system is faster and easier if the DC-1 video output is connected to a video monitor.

Adjustments to the on-screen display are made from the Display Adjust menu. To display this menu, press the ▲, ▼ or SELECT buttons on the Remote to enter the Main Menu. Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to enter the Display Adjust menu. Press SELECT to open the On-Screen Display menu.

Display Adjustment

The Video On-Screen Display

13