Lexmark 1100, 1000 manual Envelope Feed Service Check, 4096-00X, Action, page

4096-00X

	FRU	Action
5	Home Position	Be sure the carrier returns to the home position
	Sensor	after turning the printer on. If the carrier moves half
		way, or if there is an abnormal sound, turn the
		printer off and disconnect N3 from the system
		board. Turn the printer on and check for 5 V dc
		between N3-4 and N3-2 on the system board. If
		the voltage is present, replace the home position
		sensor. If the voltage is not present, replace the
		system board.
6	Maintenance	A problem with the maintenance station can cause
	Station	carrier movement problems at the right margin. Go
		to the “Maintenance Station Service Check” on
		page 2-7.
Envelope Feed Service Check
	FRU	Action
1	Envelope Guide	Be sure the envelope guide has been turned to
		the envelope load position.
		Be sure the envelope guide is against the
		envelopes.

2-6Service Manual