Lexmark 47B1285, 47BT021 manual paper jams, Paper jam in the fuser, Paper jam under the fuser

Area Jam numbers What to do

6431–438Push the button to slide the finisher to the right, open the finisher door, and then remove the jammed paper.

7455 Open staple door, remove the staple cartridge, and then remove the jammed staple.

200 paper jam

1Open the side door of the printer.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

2Firmly grasp the jammed paper, and then gently pull it out.

Note: Make sure all paper fragments are removed.

3Close the side door of the printer.

4From the printer control panel, touch Continue, jam cleared.

201 paper jam

1Open the side door of the printer.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

2Determine where the jam is located, and then remove it:

aIf paper is inside the fuser unit, then open the fuser access door.

1

2

bFirmly grasp the jammed paper on each side, and then gently pull it out.

Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.

Note: Make sure all paper fragments are removed.

3Close the side door of the printer.

4From the printer control panel, touch Continue, jam cleared.

202–203 paper jams

If paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.

Note: Make sure all paper fragments are removed.

15

Paper jam in the fuser

1Open the side door of the printer.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

2If paper is visible inside the fuser unit, then open the fuser access door.

1

2

3Firmly grasp the jammed paper on each side, and then gently pull it out.

Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser.

Note: Make sure all paper fragments are removed.

4Close the side door.

Paper jam under the fuser

1Open the side door of the printer.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

2If paper is visible under the fuser, then firmly grasp the jammed paper on each side, and then gently pull it out.

Note: Make sure all paper fragments are removed.

3Close the side door of the printer.

4From the printer control panel, touch Continue, jam cleared.

230 paper jam

1Open the side door of the printer.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.