Lexmark 47BT021, 47B1285 manual Loading the 2000‑sheet high‑capacity feeder

1

2

3

4Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

5Load the paper stack with the recommended print side faceup.

Notes:

•Place the print side facedown for duplex printing.

•Place pre-punched paper with the holes toward the front of the tray.

•Place letterheads faceup with the header on the left side of the tray.

•Place letterheads facedown with the header on the right side of the tray for duplex printing.

•Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams and possible printer damage.

6Insert the tray.

7From the printer control panel, verify the Paper Size and Paper Type for the tray based on the paper you loaded.

Loading the 2000‑sheet high‑capacity feeder

The high‑capacity feeder can hold up to 2,000 sheets of A4‑, letter‑, or legal‑size paper (80 g/m2 or 20 lb).

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed.

1Pull the tray out.

2Adjust the width guide as necessary.

2

1

6