Manuals / Lexmark / Computer Equipment / Printer

Lexmark 522 Unpack the card. Save the packaging materials, Tighten the screws to secure the card

Models: 522

1 32

Download 32 pages 46.71 Kb

Page 17

4 Unpack the card. Save the packaging materials.

3 Remove and save the two screws on the back of the printer that attach the metal plate to the slot. Remove and discard the plate.

4 Unpack the card. Save the packaging materials.

5 Align the connection points on the card with the connector on the system board and push the card firmly into the system board connector.

6 Insert the two screws saved from the metal plate (or the extra screws shipped with the card) into the holes.

7 Tighten the screws to secure the card.

15

Image 17

Lexmark 522 setup guide Unpack the card. Save the packaging materials, Tighten the screws to secure the card

Contents

Lexmark T522 Setup Guide MayConventions Safety informationEdition May FCC emissions informationand bracket Getting startedSee page See page See pageInstall paper options and printer SetupInstalling the 2000-sheet drawer Step 1 Install paper options and printerInstalling a 250-sheet or 500-sheet drawer Installing a duplex unit You plan to install memory or option cards and f Close the upper front door e Guide the print cartridge down as it drops and snaps into place3 Attach decals to any optional paper trays If you purchased optional drawers, you received a sheet of decals4 Attach the operator panel overlay are not using it, making the printer more compact Accessing the printer system board Step 2 Install memory and option cards3 Press down on the side door latches and open the side door Installing printer memory or flash memory Card Connectors Installing an optional firmware cardResting posts Pins Installing an option card 7 Tighten the screws to secure the card 4 Unpack the card. Save the packaging materialsReattaching the shield and closing the doors Step 3 Load print material Step 4 Attach cables Token-Ring networks Shielded Twisted Pair use a DB9 connector To attach the printer to a computer Turning on the printer Printing a network setup page Step 5 Verify printer setupReady Setting the printer IP address Step 6 Configure for TCP/IPIf your network is using DHCP, an address is automatically assigned SelectVerifying the IP settings Configure for Pull Printing ImageQuick Windows Ports Step 7 Install printer driversPrinter drivers Printing methods Creating ports and installing driversNon-NDPS queue-based Novell Distributed Print Services NDPSPrinter drivers Installation instructionsWindows Supported connections Page Lexington, Kentucky P/N 09H0401 E.C. 2H00002001 Lexmark International, Inc 740 West New Circle Road