4.3.4 Default FGID
Selects the default FGID to be used by the printer IPDS emulation when the host does not send an FGID at the start of a job. This option is only available on IPDS emulation code level 8141 or higher.
The option has three submenus containing the FGIDs used in each emulation. In the table below the emulations are
Option name | Values |
3812/3816 FGID | See page 138, 143 and 146 |
4028/31xx FGID | See page 138, 143 and 144 |
43xx FGID | See page 138, 143 and 144 |
The 4028/31xx and 43xx printers all use 300 pel fonts. Selecting a Default FGID value under the 4028/31xx menu or the 43xx menu will automatically change the Default FGID value of the other 300 pel emulations. The 3812/16 FGID is not affected by the other menu selections.
11* | Default FGID for 3812/3816. |
416* | Default FGID for 4028/31xx and 43xx. When using a CPI value |
| of 10.0 FGID 416 is equal to FGID 11. |
4.3.5 Default CPI
Selects the default characters per inch (CPI) to be used by the printer IPDS emulation when the host does not send a CPI value at the start of a job. The option does not apply to the fixed pitch fonts. This option is only available on IPDS emulation code level 8141 or higher.
The range is 5.0 to 30.0.
10.0* | Default CPI |
32