If this is the last printer setting to change, press Return to back up to the list of menus. Press Go twice to display the Ready status message. See section 3.6 Activating Saved Option Changes on page 25.
3.5 Changing a Numerical Setting
If you choose a menu item that has a numerical value, the item name appears in the first line of the operator panel display and the numerical value displays in the second line of the operator panel display.
The current setting has an asterisk (*) next to it.
To increase the numerical value, press Menu>; to decrease the current setting, press <Menu. The displayed setting changes accordingly. To save the new setting, press Select. An asterisk (*) is displayed next to the new setting.
For example, if you select MENUS, IPDS MENU, PAPER HANDLING, Top Margin, you see the following display:
Press Menu> or <Menu to increase or decrease the offset in pels for the default top margin. Then press Select. The display shows the new settings for one second and then clears and shows the word SAVED. Press Return to back up the list of menus, or press Go once to display the IDPS MENU and a second time to display the Ready status message if this is the last printer setting to be changed. See Activating Saved Option Changes below.
Another type of numerical value is found if you select MENUS, IPDS MENU, EMULATION and Default CPI. This option consists of two numbers, which are set independently of each other. Use Menu> or <Menu to increase or decrease the number value. Press Select to switch to the second number after setting the first. Press Select again to save the value. See display below.
24
