Lexmark Se 3455, K 1220 manual

3.Select TCP/IP as Attachment Type and select Settings. The TCP/IP Settings menu appears.

Enter the IP address of the printer. The IP address should be obtained from your network administrator. The TCP/IP port number entered must be either 9100, 9102, or 9600.

9100 or 9600 for MarkNet S

9100 for Parallel 1 on MarkNet Pro or MarkNet XLe 9102 for Parallel 2 on MarkNet Pro or MarkNet XLe

Refer to 4.3.14 IPDS Timeout on page 40 for further information on the selection of ports.

Select OK and then Create. The PSF/2 printer device is now created and is ready to print from a PSF/2 connected IBM host.

97