5.4.2 Setting the MarkNet XLe TCP/IP Protocol Settings
The following TCP/IP protocol settings must be set in order for the host to send jobs to the printer through the MarkNet XLe. Contact your network administrator if you need help with these settings.
Activate | Yes |
Set IP Address | 157.184.67.102 |
(Address available from your network administrator) | |
Set IP Netmask | 255.255.255.0 |
(Appropriate netmask for your network) | |
Set IP Gateway | 157.184.67.1 (IP address of the IP gateway) |
5.4.3 Setting the MarkNet XLe Job Timeout
The recommended setting for the MarkNet XLe Job Timeout is 0 (disabled). This allows the host system "release timer" value to control when print jobs from another protocol, interface, server, or host can be started.
You may set the MarkNet XLe Job Timeout value to a value greater than the host "release timer" value. Errors are very likely to occur when the printer requires user intervention and the intervention is not cleared before the timeout occurs.
Setting the MarkNet XLe Job Timeout smaller than the host "release timer" value will result in communication errors after the job has printed.
5.4.4 Setting the MarkNet XLe Busy Timeout
The recommended setting for the MarkNet XLe Busy Timeout is 0 (disabled). This allows the host system "release timer" value to control when print jobs from another protocol, interface, server, or host can be started.
You may set the MarkNet XLe Busy Timeout value to a value greater than the host "release timer" value. Errors are very likely to occur when the printer requires user intervention and the intervention is not cleared before the timeout occurs.
72
