Installing the 2000-Sheet Drawer

Decide on an installation location for the 2000-sheet drawer. The printer, and possibly other options, will be placed on top of the drawer, so allow a maximum of 137.16 cm (4 ½ ft) for clearance.

Note: Your drawer is pre-configured to either letter or A4 paper size. To use a different paper size, see page 12 before placing any options or the printer on the 2000-sheet drawer.

1 Turn the printer power off and unplug the power cord.

2 Disconnect any other cables attached to the printer.

3 Place any options you may have on top of the drawer one at a time. Refer to your printer documentation for proper installation instructions.

4 Ask someone to help you lift the printer and position it above the drawer and any options you may have installed in step 3.

CAUTION: Make sure your fingers are not under the printer when you set it down. Use the handholds on the printer or ask someone to help you lift it.

6

2000-Sheet Drawer User’s Guide