Introduction
The 2000-sheet drawer gives your printer added capacity by allowing you to load up to four reams (approximately 2,000 sheets) of 20 lb paper.
Your drawer is pre-configured to either letter or A4 paper size. To use a different paper size, see page 12.
Your printer has an autoconnect feature that recognizes when the 2000-sheet drawer has been installed. After starting your printer, this option is shown as Tray 2, Tray 3, Tray 4 or Tray 5, depending upon the number of installed paper sources.
To ensure reliable paper feeding, it is important that you select paper recommended for use with the 2000-sheet drawer and that you load it properly. See page 15 for information on paper specifications and page 16 for loading instructions.
To ensure compatibility with your printer, verify your drawer is labeled with a colored triangle located on the top left front corner.
Refer to your printer documentation for information pertaining to electronic emissions, safety, and warranty.
2000-Sheet Drawer User’s Guide | 1 |