Unpacking the
1 Remove all items shown in the illustration from the carton. If any items are missing, contact the place where you bought the
Note: The 16 AWG power cord is included only with units intended to operate at 100 - 127V power.
Printer compatibility label | Decals |
| |
(colored triangle) |
|
Stabilizer feet
16 AWG power cord
Jumper cord
2 Remove all packing material and tape from each item.
Note: Save the carton and packing material in case you need to repack the
3 Peel the appropriately numbered decals from the sheet and attach them to the recessed areas on the drawer. Choose the number that corresponds to the number of paper options you are attaching, including the standard output tray.
2 |