Changing the Paper Size

Your 2000-sheet drawer comes pre-configured for either letter or A4 paper size.

To change the paper size prior to installation, proceed to step 7 of the following instructions now. If you are changing the paper size for a unit that is already attached to a printer and a power source, proceed with step 1:

1 Open the loading door.

2 Push the elevator down button located on the left side of the door opening. See illustration on page 17.

3 Remove paper from the elevator tray and close the loading door.

4 Re-open the door. The printer elevator tray should be approximately halfway up.

5 Unplug the power cord.

6 Remove the printer and all attached options from the 2000-sheet drawer.

CAUTION: Remove the attached options one at a time. Make sure your fingers are not under the printer when you set it down. Use the handholds on the printer or ask someone to help you lift it.

7 Locate the paper size selector knob on top of the drawer. See page 13 for an illustration and location of the knob.

Note: Six paper selections are available. Each paper selection is color-coded. A new paper size is displayed on the operator panel after the paper elevator tray is in the up position.

8 To make a selection, turn the knob completely in a counterclockwise direction. This action sets the paper size to legal (LGL).

12 2000-Sheet Drawer User’s Guide