Are you experiencing slow printing while using a parallel cable? For faster printing:
1Disconnect the parallel cable from your printer and computer.
2Uninstall the printer software following the steps on page 21.
3Connect your printer to your computer with a USB cable.
4Reinstall the printer software following the steps on page 21.
Is your printer connected to your computer through an external device, such as a USB hub, switch box, scanner, or fax machine? If not, see “Setup troubleshooting” on page 13 for help. If it is, follow these steps:
1Disconnect your printer from any external devices.
2Connect your printer directly to your computer with a USB (recommended) or parallel cable (Windows 95, 98, Me, and NT 4.0 only).
3Follow the instructions for your operating system to print a test page.
Windows | Macintosh | ||
1 | Open the Lexmark Z55 Solution | 1 | Open the Lexmark Z55 Control |
| Center (see page 3). |
| Panel or Lexmark Z55 Utility (see |
2 | From the Troubleshooting tab, |
| page 4). |
2 |
| ||
| click Print a test page. | Click Print Test Page. | |
|
|
|
|
–If the test page prints, the problem may be with your external devices, not your printer. Check the documentation that came with your external devices for help.
–If the test page does not print, refer to the printer software Help (see page 4) for further troubleshooting information.
For additional help solving printing problems, see “Setup troubleshooting” on page 13.
If your printer is connected to a network with a Lexmark adapter, refer to the adapter documentation for additional troubleshooting information.
12
