LG Electronics 26LH1DC4, 26LH1DC3, 26LH1DC5 manual Appendix, Troubleshooting

APPENDIX

TROUBLESHOOTING

Some quick and easy tips to resolving problems

Software Problems

TV not functions properly.

Software lockup. 8 Remove power cord for 5 minuts.

Software Corrupted.

2-5-5 + MENU performed	8 Start all over with item 117, set to 001, press Enter then redo Auto Program, Channel List, Clock, etc.
more than once.	*Note: 2-5-4 + MENU can be done more than once.

Virtual and Physical channels appear in channel scan w/Channel Up/Down.

8After Auto Program and Channel List, etc. press 2-5-5 + MENU to transfer channels and TV setup to

2-5-5 + MENU not per-	internal TV controller. Afterward, only Physical or only Virtual channels will appear in digital channel scan,
formed.	analog channel scan will be normal.
	*Note: Be sure to set item 028 Ch Overide to 000.

Can not direct enter channel number

Channel not included	8 After 2-5-5 + MENU, only channels included in TV controller will appear.
	If channel is available, redo channel scan. If it is not available it will not appear on the TV screen.
in channel scan in TV
controller.

Power

No Power. 8 See troubleshooting flow chart.

Display Panel Picture

No picture

APPENDIX

Display panel is turned off.

Antenna/Cable not

connected.

Connections incorrect.

M.P.I. not connected.

Encrypted program.

Wrong tuning band.

8Turn TV on.

8Power failure?

8Connect Antenna/Cable signal source to 26LH1DC3/4/5.

8Check connections on 26LH1DC3/4/5.

8If applicable, connect M.P.I. cable to M.P.I. device.

8Try another channel.

8Adjust Installer menu settings.

69