EXTERNAL EQUIPMENT SETUP
VCR SETUP
■To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover
the product bearing this phenomenon.
EXTERNAL EQUIPMENT SETUP
When connecting with an antenna
1.How to connect
1 Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE socket on
the set.
2Connect the antenna cable to the RF antenna in socket of the VCR.
VIDEO | L | R | ANT OUT | |
OUTPUT |
|
| ANT IN | |
SWITCH |
|
|
|
|
Wall Jack
1
2.How to use
■Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
■Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
2
Antenna
16
