COMMERCIAL MODE
CLONING CONNECTIONS/TEACHING SETUP
Teaching the Master Setup to Another 26LH1DC3/4/5
- Connections for the LT2002 to Teach another 26LH1DC3/4/5 the Master Setup
Antenna | Ferrite Core | |
or CATV | ||
(TDK, ZCAT | ||
| ||
|
COMMERCIAL MODE
Master 26LH1DC3/4/5
Teach Master 26LH1DC3/4/5’s Setup to the target 26LH1DC3/4/5
After learning is complete, remove the M.P.I. cable from the master 26LH1DC3/4/5 and connect it to the target 26LH1DC3/4/5 that you want to copy the master 26LH1DC3/4/5’s setup into. With “THE CLONE HAS CONTROL OF TV” message displayed, press 2 to go to the “TEACH TO TV” option, press ON/OFF, POWER, or ENTER. Select the LT2002 memory that the new setup is in. Press On/Off to transfer the new setup and other information to the new 26LH1DC3/4/5. Teaching usually takes
After the “TEACHING COMPLETE” message is displayed, press any button to return to the Clone menu, then press ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable from the target, newly cloned 26LH1DC3/4/5.
Disconnect 26LH1DC3/4/5 Power for 15 Seconds Unplug the AC power cord of the newly cloned 26LH1DC3/4/5 from the power outlet for about 15 seconds to activate the newlycopied setup.
Clone Programmer
CLONE SELECTION MENU
(1)LEARN FROM TV
(2)TEACH TO TV
(3)SET CLONE CLOCK FROM TV
(4)SET TV CLOCK FROM CLONE
(5)DISPLAY TV SETUP
(6)DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.
-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER
This menu should appear after any key is pressed on the Installer remote.
TEACHING IN PROGRESS,
PLEASE WAIT
This display will appear during Teaching function.
TEACHING COMPLETE
This display will appear after Teaching is complete.
56
