INSTALLER MENU
053- DIS.
Set to 0 to enable the
069 - EN.
Set to 0 to disable custom color for the
070 - FOR.
Set according to Color Chart. |
| ||
0 = Black | 3 | = Yellow | 6 = Cyan |
1 = Red | 4 = Blue | 7 = White | |
2 = Green | 5 | = Violet |
|
*Note: If foreground and background colors are the same, menu background is transparent.
071 - BCK.
Set according to Color Chart. |
| ||
0 = Black | 3 | = Yellow | 6 = Cyan |
1 = Red | 4 = Blue | 7 = White | |
2 = Green | 5 | = Violet |
|
*Note: If foreground and background colors are the same, menu background is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNEL OVERRIDE is set to 0, “NOT AVAILABLE” message is displayed when directly accessing a channel not in the channel scan list available in memory.
075 - REVERT CH (Revert to Start Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel.
077 - QUICK SHUTOFF
Allows TV power off to be controlled by the pillow speaker channel selection button. User would press and hold button down for time required to have TV turn off. Value Range 0 - 17, each number represents 1/2 second. For example, if set to 4, TV would turn off if user held speaker channel button down for 2 seconds.
078 - UPN MSB (UPN Most Significant Byte) User programmable number, most significant byte readable by M.P.I. command.
*Note: Not linked to serial number.
079- UPN
080- UPN
081 - UPN LSB (UPN Least Significant Byte) User programmable number, least significant byte readable by M.P.I. command. Not linked to serial number.
082 - CHKSM ERROR (Checksum Error) Enforces rigid M.P.I. checksum validation. Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I. async port).
SPI is always checked.
083 - HANDSHK TIME (Handshake Time)
Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5.
(Timeout = 25.5MS + [25.5 MS* Handshake time]).
084 - PERMANENT BLK (Permanent Block)
Allows Lock (Parental Control) blocking schemes to be permanent by disabling the blocking hours function.
Set to 1 to install Parental Control restrictions permanently. Set to 0 for
087 - REAR RGB EN. (Rear RGB1 Enable) Controls access to rear RGB1 input on display panel. Set to 1 to enable RGB1 input for DTV. Set to 0 to disable RGB1 input.
*Note: The setting above is ignored if Installer item 093 RJP AVAILABLE, is set to 1. Then 087 - REAR RGB EN. above, always resets itself to PC (1)
088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes if no signal is present.
090 - KEY LOCK
If set to 1, display panel keyboard is locked out, not available to end user. IR receiver remains functional.
091 - YPrPb2 EN. (Rear Component Video 2 Enable) Set to 1 to enable display panel Component 2 input. Set to 0 to disable display panel Component 2 input.
092- RGB2 ENABLE
093 - RJP AVAILABLE
Set to 1, remote jack pack is available.
Set to 0, remote jack pack is not available.
*Note: This item can not be set to 1 if item 040 AUTO CAMPORT is set to 1.
(Continued on next page)
COMMERCIAL MODE
61
