APPENDIX
Erratic Operation
Installer menu setup.
Wrong Installer menu
settings.
Software problem.
8Adjust Installer menu settings as required.
8Remove TV power cord for 15 seconds.
APPENDIX
Remote Control
Remote doesn’t work.
Remote not in TV | mode. | 8 | Use Mode key to select TV; puts remote into 26LH1DC3/4/5 mode. | |
Not aimed at IR | remote | 8 | Point remote at TV’s IR receiver on TV. | |
sensor. |
| |||
|
|
| ||
Remote too far from IR | 8 | Move remote closer to TV’s IR receiver or darken room. | ||
sensor. | ||||
|
| |||
IR path to TV’s receiver | 8 | Remove obstructions. | ||
obstructed. | ||||
|
| |||
Weak batteries. | 8 | Replace batteries. | ||
Wrong battery polarity. | 8 | Check that “+” and | ||
Too much light in room. | 8 | Dim room light. | ||
Wrong Installer remote | 8 | Requires compatible Installer remote, contact your LG dealer. | ||
control. | ||||
|
| |||
Incorrect Bed | 8 | Set correct Bed | ||
Picture Reception
Normal picture, poor or no sound.
Audio muted.
Broadcast problem.
TV Speakers Off.
8Press MUTE or use Volume Up key to increase sound level.
8Try a different channel.
8Turn TV speakers on.
Broadcast Tuning Mode Digital Channel OSD
No Information available display.
Item 103 set to 1 physical 8 Set Item 103 to 0 for information to be added to virtual channel tuning digital OSD. channels tuning.
*Note: For other problems not caused by the 26LH1DC3/4/5, refer to other devices’ operating guide.
70
