8

Reshuffle the programme list

You can change the order of the stored TV
channels.
&Select Reshuffle in the Installation menu.
éFollow the instructions on screen.

Select Favourite TV channels

&Select Favourite programmes in the Install
menu.
éSelect your programme number with the
cursor up/down.
“Select Yes or No with the cursor right.
‘Repeat éand “for every TV channel or
external you want to make a favourite or a
non-favourite TV channel or external.
Your TV is equipped with integrated front left, right
and centre loudspeakers,capable of reproducing
Stereo,Dolby 3 stereo and 3D Surround modes.
For full Dolby Pro Logic Surround sound you
should use two amplified rear surround speakers
connected to the back of the TV.
See Extra loudspeakers/Amplifier,p. 21.
Depending on the output and Surround mode (see
Main menu,TV,Sound, Surround mode, p.12)
selected, some menu items may be greyed out and
are not selectable.
Test tone controls
The menu item Test tone enablesyou to
balance the volume levels of the speakers.
&Select Test toneand press the cursor right.
éOnce turned on, the Test Tone will circulate
through the left,centre, right speakers and
both rear surround speakers (if present).
“Press the cursor up/down to select the desired
speaker for individual volume level adjustment.
‘Press the cursor left/right to adjust the volume
level.
Speakers
Surround Speakers
See Connect Peripheral Equipment,Extra
loudspeakers/amplifier,p. 21.
If no Surround Speakers are connected do
not change the predefined factory settings
which is Off.If Surround Speakers are
connected select On.
(Dolby Pro Logic and Hall are not available
if Off is selected.)
Auto Surround
Sometimes the broadcaster transmits
special signals for Surround Sound
encoded programmes.
The TV automatically switches to the best
surround sound mode when Auto
Surround is switched On.
However it is possible to overwrite this
setting.
TV Setup
The Setup menu contains items that control the
settings of the TV’s functions, features,ser vices and
peripherals you may have connected.
The Speakers menu reflects the speaker-related
controls.
The General menu allows you to change settings
that will typically be accessed only occasionally.
The Source menu allows you to select a source.
The Decoder menu allows you to define one or
more programme numbers as decoder programme
numbers.
Speakers General Source Decoder
Test tone
Balance
Centre volume
(Surround volume)
Surround speakers
Auto surround
Setup
2229.1 gb 12-03-2003 09:55 Pagina 8