21
The recorder (VCR or DVD+R(W)) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the
cursor up/down.
“Press the cursor left/right,up/down to select
one of the recorder or DVD functions.
The key ®for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the Bkey for 3 seconds,
both TV and the recorder are switched to standby.
Òp‡π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
DVD
REAR multimedia loudspeakers
&Select Surround speakers On in the Setup
menu, see p.8.
éConnect the audio cables to the rear
loudspeakers and to the Dolby Surround
output SURROUND OUT at the back of your
TV. There is only one output for both
speakers.
“Adjust the volume of the rear loudspeakers.
Use the Test tone function in the Speakers
menu, see p.8.
Note: Once you have adjusted the volume of the
rear loudspeakers, do not change it while watching
TV as the whole configuration operates with the
volume adjustment of your TV.
(Analogue) Multichannel surround receiver
&Connect a MultiChannel surround receiver to
the AUDIO OUT R and Lconnectors at the
back of your TV.
éIf you want the loudspeakers of your TV to act
as centre speaker,also connect an audiocable
to the MultiChannel surround receiver
CENTRE OUT connector and to the CENTRE
IN connector at the back of your TV.
“Select Centre input On in the Source menu.
See p.10. The loudspeakers of the TV will now
only produce centre sound.
‘If necessary,adjust the volume level of the
centre sound in the Centre in volume menu
item of the Source menu.The overall volume
has to be controlled via the MultiChannel
surround receiver.
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Press the vkey on the remote control repeatedly to select EXT1,EXT2,EXT3,EXT4 or SIDE
according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder,recorder) carries out the switching itself, when it is switched on.
To select connected equipmentCinema Link surround receiverRecorder or DVD with EasyLink

Connect extra loudspeakers/amplifier

2229.1 gb 12-03-2003 09:55 Pagina 21