TV menu

Press the MENU key on the remote control to summon the main menu.

Press the i key on the remote control to get information about the selected menu item.

Picture menu

Picture Sound Features & Press the cursor right to select Picture.

TV

Smart picture Contrast Brightness Colour Sharpness Tint Digital options

Dynamic contrast

DNR Colour enhancement (Hue)

Picture format

éSelect the menu items in the Picture menu with the cursor up/down.

Adjust the settings with the cursor left/right or enter the list of submenu items with the cursor right. Select a submenu item with the cursor up/down.

Note: To remove the menu background before adjusting the picture settings, see Select TV setup, General, p. 9.

Smart picture

Select Smart picture to display a list of predefined picture settings, each corresponding with specific factory settings. Personal refers to the personal preference settings of picture in the picture menu.

Digital options

Pixel Plus is the most ideal setting, doubles the horizontal resolution and increases the number of lines with 33%.You may consider to select Movie Plus in case a halo effect should disturb you. Dependent on your own preference, select Double lines, or 100 Hz Digital Scan.

Note: When 60 Hz NTSC material is used, the options are changed to Pixel Plus or Progressive, progressive scan without motion compensation.

Active Control

The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.

&Press the h key on the remote control.

éThe Active Control menu appears.

Press the cursor up/down to select the Active Control values Off, Minimum, Medium (recommended) or Maximum.

The picture settings are being optimised continuously and automatically which is displayed by bars.The menu items can not be selected.

Press the cursor right to select Smart picture.

(Press the cursor up/down to select one of the predefined picture settings.

§Press the cursor right to select Active Display.

èPress the cursor up/down to select Bars, one of the Dual screen demos or Off.

When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on.

! Press the h key again to switch off the Active Control menu.

11

Page 13
Image 13
Philips MCS 130 SURROUND, MCS 100 SATELLITE manual TV menu, Picture menu, Smart picture, Digital options, Active Control