9
General General
Menu background
Smart surf
Factory settings
NEXTVIEW provider
Tilt adjust
OSD
Programme title
Teletext level 2.5
Auto LCD movement
Set/Change code
Setup
This menu allows you to change various settings
that are presumably adjusted less frequently than
most other settings.
Press the ikey on the remote control to get
information about the selected menu item.
Smart surf
&Select Smart surf.
éWith the cursor left/right, select
• 2 programmes if you want the 0key to
toggle between the current and the previously
selected channel,
•9 programmes if you want the 0key to
summon a list of up to 9 channels which can
be selected,
•Themes if you want the 0key to quickly
select TV programmes if NEXTVIEWwith
defined themes is broadcast.
To add/remove a channel or source:
Tune to the channel or source you wish to add
or remove.Press the 0key and press the
cursor right to add or remove.
Note: If there are already 9 channels/sources in the
list, the one at the bottom of the list will be
removed.
Factory settings
This resets the picture and sound settings to
their predefined factory values, but maintains
the channel installation settings.
NEXTVIEW provider
Select a TV broadcaster that provides
NEXTVIEW data. How to make use of NEXTVIEW,
see p.14.
OSD (On Screen Display)
See Use of the remote control,p. 4, iOn
screen information.
&Select OSD.
éSelect Normal to activate the continuous
display of the programme number.Also TV
channel and programme information are
extended. Minimum will display reduced
channel information.
Note:When subtitles is switched on, see Features,
p.13, continuous display of the programme number
is not possible.
Teletext level 2.5
Some broadcasters offer the opportunity to
see more colours,other background colours
and nicer pictures in the teletext pages.
&Select Teletext level 2.5.
éPress the cursor right to select Teletext level
2.5 On to take advantage of this feature.
“Press the cursor right again to select Teletext
level 2.5 Off if you like the more neutral
teletext layout.
The selection made is valid for all channels
which broadcast teletext level 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext level 2.5.
Set/Change code
The Child lock feature (see TV,Features, p.13)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels,a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&Select Change code.
éIf no code exists yet,the menu item is set to
Set code.If a code has previously been
entered,the menu item is set to Change code.
Follow the instructions on screen.
Important:You have forgotten your code!
&Select Change code in the General menu and
press OK.
éPress the cursor right and enter the overriding
code 8-8-8-8.
“Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
2229.1 gb 12-03-2003 09:55 Pagina 9