Spray Gun Operation
SPRAY GUN
Attach spray gun to airless unit and tighten fittings securely. Set the gun safety latch. (Also may be called gun safety lock, or trigger lock)
*The gun safety latch should always be set when the gun is not being triggered.
Read all warnings and safety precautions supplied with the spray gun and in product manual.
MAJOR COMPONENTS OF SPRAY GUN & | ™ | |
REVERSIBLE | ||
|
Reversible
Spray Tip
Tip Guard
Trigger Guard
Press up here & pull gently to remove trigger guard
Gun Safety
Latch or Lock
Gun Handle. Unscrew from gun head to service filter inside.
SPRAY TIP ASSEMBLY
1.Be sure the pressure relief procedure is followed before assembling tip and housing to the gun.
2.Insert
3.Guide the metal seat into
4.Insert the
5.Finger tighten
6.Turn guard in the desired position.
7.Completely tighten the retaining nut.
Retaining Nut | ||||
Metal Seat Part # | ||||
Guard Housing Assembly |
|
| Part # | |
|
| |||
G Thread 7/8" |
| |||
F Thread 11/16" |
|
|
| |
|
| |||
| ||||
|
|
| Part # |
|
TO REMOVE CLOGS FROM SPRAY TIP
1.Lock gun safety latch.
2.Turn
3.Disengage trigger lock and trigger gun into the pail.
4.If the
5.Engage gun safety latch and return handle to the spray position.
Retaining Nut
Reverse to
Unplug
Spray Position Shown
CLEANING SPRAY GUN
Immediately after the work is finished, flush the gun out with a solvent. Brush pins with solvent and oil them lightly so they will not collect dried paint.
CLEANING FILTER IN GUN HANDLE
To clean the filter, use a brush dipped in an appropriate solvent. Change or clean filters at least once a day. Some types of latex may require a filter change after four hours of
operation.
14
