62CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
26.On timer input (Command: f u)
Adds a new schedule entry by selecting input for the current on timer setting.
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
Data (adding schedule) 60: RGB
90: HDMI (HDMI1)
Data1
1. f1h to f7h (reading data)
F1: Select the 1st schedule input source
F2: Select the 2nd schedule input source
F3: Select the 3rd schedule input source
F4: Select the 4th schedule input source
F5: Select the 5th schedule input source
F6: Select the 6th schedule input source
F7: Select the 7th schedule input source
Data2
1. ffh (reading data)
To read the schedule input, enter FFH for [Data2]. If no schedule is available for [Data1] when attempt- ing to read or change the schedule data, the text NG will be displayed and the operation will fail. (Example 1: fu 01 60 - Move existing schedule entries down one row each and save RGB as input source for the 1st schedule entry.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input data.)
*This function is only supported when 1 (year/month/ date), 2 (hour/minute/second) and On Time (repeat mode/time) are set.
**Input may not be supported on some models.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
**This may not be supported on some models.
27.Automatic standby (Command: m n) Configures the automatic standby settings.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off (Will not turn off after 4/6/8 hours)
01:4 hours (Off after 4 hours)
02:6 hours (Off after 6 hours)
03:8 hours (Off after 8 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
28.Auto off (Command: f g) Configures the automatic off settings.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data 00: Off (Will not turn off after 15 minutes)
01:On (Off after 15 minutes) Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
29.Language (Command: f i) Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data 00: Czech
01:Danish
02:German
03:English
04:Spanish (Europe)
05:Greek
06:French
07:Italian
08:Dutch
09:Norwegian 0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10:Chinese (Cantonese)
11:Chinese (Mandarin)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
30.ISM method (Command: j p) Selects an ISM Method option.
Transmission
[j][p][ ][Set ID][ ][Data][Cr] Data 08: Standard
20:Color wash
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
