ENGLISH
66CONTROLLING THE MULTIPLE PRODUCT
49.Tile V Size (Command: d h) To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V Size.
*This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.
Transmission
[d][h][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50
**It may not be supported depending on the model. Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
50.Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01:On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
