LG Electronics 3750, 60PG60, 5270, 5260 Programming the Remote Control, Testing your remote control

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The provided universal remote control can be programmed to operate most remote-controllable devices.

Note that the remote may not control all models of other brands.

APPENDIX

Programming a code into a remote mode

1Testing your remote control.

To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a STB) on the remote con-

trol, while pointing at the component. Test the POWER and C H buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.

2Turn on the component to be programmed, then press the corresponding mode button (such as STB) on the remote control. The remote control button of the desired device is illuminated.

3Press the MENU and MUTE buttons simultaneously, and the remote control is ready to be programmed with the code.

4Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off.

5Press the MENU button to store the code.

6Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

124