LG Electronics 50PX4DR-UA, 60PY2DR On progressing the Timeshift, play, Using the remote control

Operation

TimeShift

2. When finishing the Timeshift function, enter the Menu and then Timeshift Mode is to be Off.

Notes:

•DVR (Digital Video Recorder) : A device which records and plays broadcast program contents onto a hard disk

•in TV or SET TOP BOX.

•If available hard-disk space is low when TimeShift is initiated, It will disappear automatically from the oldest

•part.

•In order to save hard-disk space, no storage is done when there is no signal.

•The total storage space of hard-disk is 160GB, there are 10GB minimum reserved for TimeShift.

•When turning power on, it may take up to 3 minutes to initialize the HDD.

•The TimeShift function will not initiate for a copy-protected program.

•Because an analog broadcast is transfered to a digital signal, video that contains rapid movement may

show "cross stripes". This happens when the analog signal is compressed and then restored in the digital signal. The unit will attempt to soften the video in order to reduce this effect of excessive picture noise.

• When using the PIP/POP mode, TimeShift is stopped.

•In Video, Front Video, Antenna,Cable sources, TimeShift is available.

• In Audio only channel, TimeShift is not available.

On progressing the Timeshift, play

- On progressing Timeshift, It can do a diversified playing.

Indicates that the current broadcast and displayed video differ.

W Using the remote control

- You can shift playback to any point within playing the recorded program

- When playing, press the REW (FF ) or FF (GG) button.

• Like -> -> -> -> in a row. 2 times 5 times 20 times 50 times 300 times

•If the button is pressed continuously, it changes like above. If the button is taken away, it changes a normal playback.

- If you wish to return to a initial portion of Timeshift, press the button.

• If you want to return to the current live broadcast, press the button. (Indicator will be changed to LIVE)

-During playback, press the Pause ( II ) button.

• Still screen is displayed.

• Repeatedly press the Pause ( II ) button to advance frame by frame.

• When pressing the Pause ( II ) button, longly, will be shown.

• If you press the D / E button on piaying, the screen will be jumped back and forth in the current screen.

• Pressing the D button, the screen will be jumped about 20 seconds forward.

• Pressing the E button, the screen will be jumped about 8 seconds backward.

• After moving the cursor using the F / G button on playing, the point of the cursor is directly viewed on the sereen.

- Press the PLAY (G) button to return to a normal playback.

74 Plasma TV