LG Electronics 55LS33A, 65LS33A Reset Command f k Time elapsed Command d l, Key Command m c

			CONTROLLING THE MULTIPLE PRODUCT 73
31. Reset (Command: f k)		34. Time elapsed (Command: d l)
Resets settings for Picture, Screen and Audio or			Checks the elapsed time.
restores factory settings.
			Transmission
(Screen reset can only be performed in RGB input
			[d][l][ ][Set ID][ ][Data][Cr]
mode.)
			Data FF: Read status
	Transmission
			Acknowledgement
	[f][k][ ][Set ID][ ][Data][Cr]
			[l][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Picture reset
			* The data received is shown as a hexadecimal
	01: Screen reset
			value.
	02: Initial settings (factory reset)
	Acknowledgement
	[k][ ][Set ID][ ][OK/NG][Data][x]

32. Current temperature (Command: d n)	35. Product serial number (Command: f y)
Checks the inside temperature value.	Checks the serial number of the product.

ENGLISH

Transmission

[d][n][ ][Set ID][ ][Data][Cr] Data FF: Check status Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

* Temperature is displayed as a hexadecimal value.

33.Key (Command: m c)

Sends a key code for the IR remote control.

Transmission

[m][c][ ][Set ID][ ][Data][Cr] Data IR_KEY_CODE Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x] For key codes, see IR Codes.

*Some key codes may not be supported on some models.

Transmission

[f][y][ ][Set ID][ ][Data][Cr]

Data FF: Check product serial number Acknowledgement

[y][ ][Set ID][ ][OK/NG][Data][x] * Data is in ASCII code.

36.Software version (Command: f z) Checks the software version of the product.

Transmission

[f][z][ ][Set ID][ ][Data][Cr]

Data FF: Check software version Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data][x]