LG Electronics A2UH243FA0(LMU240HE) Preparing work for Installation Artcool Type Only

Installation

Preparing work for Installation (Artcool Type Only)

Open panel front

1.First, push the front panel backward and lift it up to remove the two screws.

2.The moment of lifting the both lower parts of panel front, you can hear sound this panel came out, In this time panel front is separated

3.After pull down this panel a bit, and separate connecting wire with product.

Panel Front

Connector

Remove cover pipe and cover side

1.Remove two screws(for fixing cover pipe)

2.Pull up the cover side of desired connecting direction, then cover side is separated.

3.In case of connecting direction is left or right, path through the hole of cover side.

CAUTION: After removing the pipe hole, cut the burr for safety.

NOTICE When connecting pipe path through rear wall, don’t remove the hole.

Pipe hole

Drain hose junction
1. Remove the rubber stopple of desired direction of
drainage.
2. As the following picture, Insert drain hose in the
handle of drain pan, and join drain hose and con-
necting hose.
Adhesive	Only one
	desiring direction
Connecting
part
Drain	rubber cap
hose
	Service Manual	19