Operation
Turning On the unit |
|
|
| Audyssey 2EQ Automatic | |||
Before connecting the power cord, connect all your |
| Speaker Setup | |||||
|
|
|
| ||||
speakers and AV components. |
|
|
| With the bundled speaker setup microphone ( |
| 3.5mm), | |
|
|
|
|
|
| ||
1. Plug the power cord into an AC wall outlet. |
| the Audyssey 2EQ Automatic Speaker Setup | function | ||||
| automatically calculates the size, level, distance, bass | ||||||
|
|
|
|
| |||
2. Press the POWER ( / l or |
| ) button. |
| management crossover frequency, and optimal settings | |||
|
| ||||||
|
| for each speaker at the listening position. Audyssey | |||||
The unit turns on, the display window lights up. |
| ||||||
| 2EQ also corrects acoustical distortions within the | ||||||
|
|
|
|
| |||
To turn off the unit, press the POWER ( / l or |
| ) | listening area. | ||||
| Before using this function, connect and position all your | ||||||
button. |
|
|
| speakers. | |||
The unit will enter the Standby mode. |
|
|
|
| |||
Using Headphones |
|
|
| Notes |
| |||
|
|
| • | Set the volume of subwoofer between middle and | ||||
|
|
|
|
| ||||
|
|
|
|
|
| maximum before the automatic speaker setup. | ||
You can connect a pair of stereo headphones (6.3 | • | When positioning the microphone, use a tripod or | ||||||
phone plug) to the unit’s PHONES jack for private |
| stand at ear height with the microphone pointing | ||||||
listening. |
|
|
|
| directly up. It is not recommended to place the | |||
|
|
|
|
|
| microphone on the back of the couch or recliner, or | ||
|
|
|
|
|
| held by the hand. Be sure that the path from | ||
| INPUT |
|
|
|
| microphone to the speakers is not blocked by | ||
| SELECT |
|
|
|
| objects. Avoid placing the microphone close to a | ||
| / l |
|
|
|
| |||
|
|
|
|
| seat back or wall as sound reflections may cause | |||
|
|
|
|
|
| |||
| 2EQ | M1 | M2 | M3 |
| adverse results. |
| |
| DISPLAY |
|
| |||||
|
|
|
|
| • | Make sure the environment is quiet before starting | ||
|
|
|
|
|
| the Audyssey 2EQ automatic speaker setup. Turn | ||
|
|
|
|
|
| off air conditioning units if possible. |
| |
Notes |
|
|
| • | Loud test sounds will occur during Audyssey 2EQ | |||
|
|
|
| Automatic Speaker Setup. This is part of normal | ||||
• | Always turn down the volume before connecting |
| ||||||
| operation. |
| ||||||
| your headphones. |
|
|
|
|
| ||
|
|
|
| • | The Audyssey test sound may be louder than the | |||
• | The speakers are turned off while the headphones | |||||||
| typical playback level. This is required so that the | |||||||
| plug is inserted in the PHONES jack. |
|
|
|
| measurements overcome any background noise in | ||
|
|
|
|
|
| the room. |
| |
|
|
|
|
| 1. Connect the speaker setup microphone to the | |||
|
|
|
|
|
| MIC IN jack, and position it in the main | ||
|
|
|
|
|
| listening position. |
| |
|
|
|
|
|
| “MIC IN” appears in the display window. | ||
|
|
|
|
|
| MASTER VOLUME | Microphone | |
|
|
|
|
|
|
| position | |
Speaker setup microphone
Operation
23
