![Setting the Display Brightness](/images/new-backgrounds/12885/1288557x1.webp)
Setting the Display Brightness
You can adjust the brightness of the display window.
Press RECEIVER, and then press DIMMER on the remote control repeatedly.
The brightness of the display window is on/off.
Using the Mute Function
You can temporarily mute the output of the unit.
Press RECEIVER, and then press MUTE.
The output is muted and the “MUTE” flashes in the display window.
To cancel it, press the MUTE again, or adjust the volume.
Using the Sleep Timer
With the sleep timer, you can set the unit to turn off automatically after a specified period.
1.Press RECEIVER, and then press SLEEP repeatedly to select the required sleep time. The SLEEP indicator and the sleep time appears in the display window.
2.Each time you press SLEEP the setting changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF (No display)
The specified sleep time minute appears on the display for about five seconds, then the previous display reappears.
Note
To check the remaining time before the unit sleeps. press SLEEP.
-The remaining time appears for about five seconds in the display window.
Displaying Source Information
You can display various information about the current input source.
Press RECEIVER, and then press DISPLAY repeatedly to cycle through the available information.
Note
The following information can typically be displayed for input sources in the display window.
Input source & | DVD Opt.1 |
Input mode |
|
| |
Listening mode |
|
DSP BYPASS |
Surround Channel
values* & Signal 3/2.1 Analog format
* Interpreting Surround Channel values
3/2.1
A B C
A:The number of front channels (3 means front left, front right, and center).
B:The number of surround channels (2 means surround left and surround right). If there’s surround center channel information, this will be 3.
C:Subwoofer (1 means yes).
Operation
29