Adjusting the speaker level
You can adjust the level of each speaker.
1.Press RECEIVER, and then press SPK LEVEL.
2.Use v / V/b / B to adjust the level of each speaker.
For details, see “5. SPK LEVEL (Setting speaker level)” on the page 32.
To cancel it, press SPK LEVEL again.
TEST TONE
This section explains how to output test tone sequentially from each speaker.
You can adjust the speaker level and volume while listening the test tone from listening position.
1.Press RECEIVER, and then press TEST TONE. It appears in sequence as shown below.
TEST TONE FL → TEST TONE C → TEST TONE FR → TEST TONE SR → TEST TONE SC → TEST TONE SL → TEST TONE SW → TEST TONE FL...
2.Adjust the speaker level and volume while listening the test tone.
To cancel it, press TEST TONE again.
Note
The speakers cannot be calibrated while the output of the unit is muted, while a pair of headphones is connected.
AV Sync. (Adjusting the audio delay)
You may compensate for the difference through the use of delay settings in your listening position.
The audio delay is adjusted from 0msec to 300msec in 10msec steps.
1.Press RECEIVER, and then press AV SYNC.. “AV SYNC: xxx ms” appears in the display window.
2.Use v / V to adjust the audio delay.
To cancel it, press AV SYNC. again.
Notes
•This function is not operated on the TUNER, PORTABLE, USB and
•Use this function during playing a video file.
•This function has no effect on when you set HDMI OUT to TV on the SETUP menu and a signal is outputted to VCR REC. OUT L/R .
Adjusting the tone control
You can adjust the bass, middle, and treble level. The level is adjusted from
1.Press RECEIVER, and then press TONE CTRL repeatedly.
“TONE CTRL OFF” or “TONE CTRL ON” appears in the display window.
2.Press ENTER and then use b / B to select bass, middle, or treble level.
3.Use v / V to adjust the bass, middle, or treble level and then press ENTER.
Note
If you press any buttons except for MASTER VOLUME knob and VOLUME
36
