LG Electronics DR7400 Accessory Audio/Video A/V Connections, Connecting to the EURO AV2 jack

Accessory Audio/Video (A/V) Connections

Connecting to the EURO AV2 jack

Connect a VCR or similar recording device to the EURO AV2 jack of this recorder.

TV

VCR, Cable Box, or Satellite Tuner, etc.

Connecting to the Front Panel’s Input Jacks

Connect the input jacks on the recorder’s front panel to the audio/video out jacks on your accessory component, using audio/video cables.

Note:

If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available.

Jack panel of Accessory Component (VCR, Camcorder, etc.)

	VIDEO
OR	OUTPUT
	AUDIO
	OUTPUT
	R
	L
	S-VIDEO
	OUTPUT

Rear of the recorder

Tip:

You do not need to turn on the recorder to view the signals from the connected tuner on your TV.

Notes:	Front of the recorder
Pictures containing copy protection signals that
prohibit any copying cannot be recorded.

If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.

VCR RECORDER

Line input 1

TV

Line input 2

If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the EURO AV2 jack.

If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR or tuner.

10