LG Electronics DR7400 Video Setup, Audio Setup, Quality, SPDIF Setup, SPDIF Digital Audio Output

Video Setup

Quality

Set video quality in the aspects of brightness, contrast, hue, or saturation.

1.Select [Quality] option then press B on the [Initial Setup] menu

2.Press v / V to select the desired option then press ENTER. The status bar appears.

Example: Brightness

3.Press b / B to select the desired position then press ENTER to confirm your setting.

Audio Setup

Post DRC (Dynamic Range Control)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to [Post DRC].

[On] Makes low sounds clear even if you turn the volume down.

[Off] Normally select this.

[Auto] Decreases Dynamic value automatically.

SPDIF Setup

- SPDIF (Digital Audio) Output

Selects the signal type when using the DIGITAL OUT jack.

[SPDIF RAW] Select this when the recorder is connected to an audio component without a built-in Dolby Digital, DTS or MPEG decoder.

[SPDIF/PCM] Select this when the recorder is connected to an audio component with a built-in Dolby Digital, DTS or MPEG decoder.

- LPCM Out

Selects the sampling frequency of the digital audio signal.

[48K] The audio signals of DVD VIDEOs are always converted to 48 kHz/16 bit.

[96K] All types of signals, including 96 kHz/24 bit, are output in their original format.

16