System Setting 13
Settings
When the unit is
Adjust the Setup Settings
You can change the settings of the unit in the [Setup] menu.
1.Press SETUP.
2.Use w/sto select the first setup option, and press dto move to the second level.
3.Use w/sto select a second setup option, and press dto move to the third level.
4.Use w/sto select a desired setting, and press ENTER (b) to confirm your selection.
[LANGUAGE] Menu
Menu Language
Select a language for the Setup menu and on- screen display.
Disc Audio/Subtitle/Menu
Select a language for the Disc Audio/Subtitle/ Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER (b) to enter the corresponding
[Off] (for Disc Subtitle): Turn off Subtitle.
[DISPLAY] Menu
TV Aspect
Select which screen aspect to use based on the shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
Display Mode
If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen.
[Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
TV Output Select
Select an option according to the TV connection type.
[RGB]: When your TV is connected with the TO TV (SCART) jack.
[YPbPr]: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit.
3
System Setting
