Getting started
Turning your phone on and off
Turning your phone ON
1.Install a battery to the handset and connect the phone to an external power source such as the mains adapter, cigarette lighter adapter or
2.Press 
for a few seconds until the LCD screen is turned on.
3.Depending on the status of the PIN code request setting you may need to enter your PIN code.
Turning your phone OFF
Press 
for a few seconds until the LCD screen is turned off.
Access codes
You can use the access codes described in this section to avoid unauthorised use of your phone. The access codes (except PUK and PUK2 codes) can be changed by using the Change codes feature
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card. When the PIN code request is set to Enable, your phone will request the PIN code every time the phone is switched on. When the PIN code request is set to Disable, your phone connects to the network directly without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to access functions such as Advice of Call Charge and Fixed dial number.
These functions are only available if supported by your SIM card. Check with your network for further information.
F1200 User Guide | 23 |
|
|
