1Disassemble the Hall Sensor
1) Disassemble the hook of Hall Sensor by
2) Pull up Hall Sensor slowly as shown in picture.
Caution
If you disassemble by force,not following the directions, the hooks of stator(red circled) might broke up.
Hence need change of stator assembly. So disassemble cautiously.
2 Assemble the Hall Sensor
1) Adjust the hole of Hall Sensor to | 2) Push down the Hall sensor, |
the hooks of stator as picture.(red circled) | and assemble to the hook for sure. |
[Note] |
|
Hall Sensor Part No. |
|
• 24” / 25” : 6501KW2001A | • 27” : 6501KW2002A |
30
