![](/images/new-backgrounds/1171040/17104015x1.webp)
Connecting the Display
Connecting with the PC
1. | Before setting up the monitor, ensure that the power to the monitor, the computer |
2. | system, and other attached devices is turned off. |
Connect signal input cable 1 and power cord 2 in order, then tighten the screw |
of the signal cable.
AConnect
BConnect
CConnect HDMI Cable
AV equipment
Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.
Headphone/Earphone Input
*HDMI is optimized on the AV equipment.
*Not supported PC
OR
When using a
Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
7