LG Electronics LCE30845 service manual Cooktop Installation, Wire Grounded Junction BOX

INSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTIONS (cont.)

IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996 NEC), MOBILE HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES DO NOT PERMIT GROUNDING TO THE NEUTRAL (WHITE) WIRE

Observe all governing codes and local ordinances.

Disconnect the power supply.

At the circuit breaker box, fuse box or junction box, connect appliance and power supply cable wires as shown.

WARNING: If connecting to a 4-wire power supply cable electrical system, the appliance frame connected ground wire MUST NOT be connected to the neutral wire of the 4-wire electrical system.

4-WIRE GROUNDED JUNCTION BOX

Cable from power supply

White wire

Ground(no connection) wire

Red

wires Black wires

	Junction box
Green wire(ground)	UL-listed conduit
	connector
Cable from cooktop

COOKTOP INSTALLATION

Visually inspect the cooktop for damage. Make sure all cooktop screws are tight (see below for locations).

Screws

Carefully lower the cooktop into the counter-top cutout, making sure not to trap any wires. NOTE: Do not use caulking compound. The cooktop must be removable, should service be required.

WARNING: Do not remove the nylon spacers on the edges of the cooktop. These spacers center the cooktop in the space provided. The cooktop must be centered to allow proper venting and to prevent excess heat buildup that may result in heat damage or fire.

Nylon spacers

LGE Internal Use Only	- 15 -	Copyright © 2007 LG Electronics. Inc. All right reserved.
		Only for training and service purposes