Installation
INSTALLATION AND SETUP SHOULD BE CARRIED OUT BY AN AUTHORISED TECHNICIAN IN LINE WITH CURRENT INSTALLATION STANDARDS.
Positioning the hob
To install these models, an opening with the dimensions shown in figure 2 will be cut into the unit’s worktop.
The minimum distance between the surfa- ce supporting the cooking pans and the lower part of the kitchen unit or the hood located above the hob should be 650 mm. If the hood’s installation instructions recommend that the gap is greater than this, you should follow this advice.
The unit where the hob and oven will be located will be suitably fixed.
INSTALLATION WITH CUTLERY DRA- WER OR LOWER CABINET
In mixed induction - vitroceramic hobs, if you would like to have a cabinet or a cutlery drawer under the hob, it is neces- sary to put a separation board in between the two. The board should be situated 20
mmbelow the underside of the hob, lea- ving a free space of at least 20 mm until the end of the cabinet (figure 1).
This prevents accidental contact with the hot surface of the casing of the heating elements under the apparatus (figure 1).
In induction hobs, there should be a mini- mum distance of 5 cm between the drawer and the opening to the fan (a separating board is not necessary).
Please do not store objects that can obstruct the hob fans or possibly flammable materials in the drawer.
GB
Minimum distance | fig. 1 |
to wall |
|
Minimum ventilation distances
DRAWER
OVEN
Mixed hobs:
DRAWER
INSTALLATION WITH FAN OVEN UNDER THE HOB
The oven should be installed according to the corresponding manual.
11
