with the same settings (power levels, cooking time) as before the pause.
The second button must be pressed within 10 seconds, otherwise the stove will switch off. If cooking is not resumed within 10 minutes of being paused, the stove will again switch off.
Function for keeping a pan hot
(models …622)
Using this function, it is possible to keep food hot in a pan placed on the cooking area.
1 There is a pan on one of the heating ele- ments at a previously selected cooking temperature.
2 It is necessary to touch sensor 
(4), after which the symbol 
will appear in the indicator. This is a level between the
0and 1.
To disconnect this function, just touch sen-
sor 
(4) and change to level 0. This function will only work for a maximum of 120 minutes, after which the hob will dis- connect.
Timer function
This function aids the cooking process, as it is not necessary to be watching: You can set a hob timer and it will turn off automa- tically once the selected time has elapsed.
There are 4 lights surrounding the timer display, showing which of the hobs has a timer set. For example, if you set a timer for the upper left hob, the light on the upper left of the timer display will turn on.
If there are no timers set on any of the hobs (no hob timer light (10) on), the timer can be used as a countdown timer (see
GB
section "Countdown Timer").
On these models you can set the count- down timer and the hob timer from 1 to 99 minutes. All of the hobs can be program- med independently and operate simulta- neously.
Timing a hotplate
1 The hotplate to be timed has to be selec- ted. The corresponding decimal point (11) must be lit.
2 Select a power level of between 1 and 9 using the 
or 
sensors (5/4).
3 Touch the clock sensor 
(7). The deci- mal point (11) of the time display (8) will come on
4 Touch the clock sensor 
sensor (7) until the time display of the correspon- ding hotplate (10) flash on.
5 Now set a cooking time, between 1 and 99 minutes, using the sensors 
or 
(5/4). With the first one you will start with 1, and with the second with 30. Touching both at the same time the value will come back to 00.
The clock will begin to control the time automatically. The control display (10) corresponding to the timed area will remain lit up. If you want to set a time for another hotplate, you have to repeat the 4 and 5 steps.
When the chosen time elapses, the timed area will switch off and the clock will give a series of beeps for several seconds. The time display will show 00 and this will flash on and off, together with the pilot light of the hotplate that has disconnected.
If the hotplate that has been switched off is
23
