GB
2 Before using any hotplate, touch the clock sensor 
(7). All the control dis- plays (9) are switched off.
3 Use the sensors 
or 
(7/4) to input the time you want.
When the programmed time elapses, a series of beeps will sound for several seconds. To switch these beeps off, touch the sensor 
(7).
DISCONNECTING THE COUNTDOWN TIMER
If you wish to stop the countdown timer before the programmed time has elapsed:
1 Select the countdown timer sensor 
(7). The decimal point (11) will come on.
2 Use sensor 
(4) to reduce the time to 00. The clock is cancelled.
SWITCHING OFF QUICKLY
1 Select the countdown timer sensor 
(7). The decimal point (11) will come on.
2 Touch sensors 
or 
(7/4) simulta- neously to disconnect the countdown timer.
Touch control user instruc-
tions (models ...640 and ...644)
CONTROL PANEL ELEMENTS (see fig. 8)
1On/Off button.
2Hob selection buttons.
3Power and/or residual heat, and lock activation displays.
4Reduce power/time button (reduce).
5Increase power/time button
6Power button.
7 Timer/countdown timer selection button
8Timer display (timer).
9 Stop button.
10 Hob timer light.
11 Decimal point in the power and timer displays.
-Shines (on): Chosen induction element (ready to be used).
-Doesn't shine (off): Induction element locked (cannot be used).
13 Countdown timer indicator.
N.B.: * Only visible when in operation.
The sensors marked on the control panel are used for control purposes.
There is no need to exert pressure on the
Models ...640 and ...644
fig. 8
20
