LG Electronics LH-T1000 owner manual Operation with DVD and Video CD Playing a DVD and Video CD

Operation with DVD and Video CD

Playing a DVD and Video CD General Features

Playback Setup DVD-V DVD-A VCD2.0 VCD1.1

Turn on the TV and select the video input source con- nected to the DVD/CD receiver.

Audio system: Turn on the audio system and select the input source connected to the DVD/CD receiver.

1 Press OPEN/CLOSE to open the disc tray.

2 Load your chosen disc in the tray, with the playback side facing down.

3 Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu might appear instead.

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE /GROUP

DVD-V DVD-A 1 /3 1/6

When a disc has more than one title/group, you can move to another title as follows:

Press DISPLAY, then press the appropriate number button (0-9) to select a title/group number.

Moving to another CHAPTER/TRACK

DVD-V DVD-A VCD1.1

1 /12 1 /3 1/6 1 /12

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which offers a menu.

DVD-V

Use the 1 234 buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU to return to the menu screen.

DVD-A

Use the 1 2 3 4 buttons to select an option you want, then press ENTER to view the option.

VCD2.0

Use the number buttons to select the track you want to view.

Press RETURN to return to the menu screen.

Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 18.

otes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Parental Control”, on page 19).

–DVDs may have a regional code.

Your receiver will not play discs that have a regional code different from your receiver. The regional code for this receiver is 3 (three).

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows:

Press SKIP/SCAN . or > briefly during

playback to select the next chapter/track or to return to the beginning of the current chapter/track.

Press . twice briefly to step back to the previous chap- ter/group/track.

To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the chapter/group/track icon. Then, enter the chapter/track number using the numbered buttons (0-9).

ote

For two-digit numbers, press the numbered buttons (0-9)in rapid succession.

Search DVD-V VCD2.0 VCD1.1

1Press and hold SKIP/SCAN . or > for about two seconds during playback.

The receiver will now go into SEARCH mode.

2Press and hold SKIP/SCAN . or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward).

With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward).

3To return to normal play, press PLAY.

ote

When using a DVD audio disc that includes pictures, this operation may be permitted in some picture segments.

Pause DVD-V VCD2.0 VCD1.1

1Press PAUSE/STEP during playback.

2To return to playback, press PLAY.

20