
Other Function
Sleep Timer Setting
You can set the DVD/CD receiver to turn off automati- cally at a specified time.
1 | Press SLEEP to set the desired sleep time. |
The SLEEP indicator and sleep time appears in the dis- |
play window.
2 Each time you press SLEEP the setting changes in the following order.
SLEEP 90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →
OFF
ote
You can check the time remaining before the DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the display window.
Dimmer
This function will change the brightness of the display window on the front panel during in
Press the DIMMER repeatedly.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer the telephone, “MUTE” indicator flashes in the display window.
Using Headphone Jack
Connect a stereo headphone plug (3.5mm) into the PHONES connector.
The speakers are automatically disconnected when you plug in a headphone (not supplied).
Selecting input source
You can use VCRs or other units connected to the VIDEO1, VIDEO2 connectors, Coaxial connector or Optical connector. Refer to the owner’s manual supplied with the unit for further information on the operation.
Press AUX repeatedly on the remote control to select the desired input source.
Each time you press this button, the mode of the func- tion changes in the following sequence:
VIDEO 1: for selecting the analog signal from VIDEO1 AUDIO IN (L/R) & VIDEO 1 IN Connectors.
VIDEO 1 OPT: for selecting the optical digital signal from VIDEO 1 IN & OPTICAL IN Connector.
VIDEO 1 COAX: for selecting the coaxial digital signal from VIDEO 1 IN & COAXIAL IN Connector.
VIDEO 2: for selecting the analog signal from VIDEO2 AUDIO IN (L/R) & VIDEO 2 IN Connectors.
VIDEO 2 OPT: for selecting the optical digital signal from VIDEO 2 IN & OPTICAL IN Connector.
VIDEO 2 COAX: for selecting the coaxial digital signal from VIDEO 2 IN & COAXIAL IN Connector.
otes
The Optical input function is available only when the other unit’s Sampling Frequency is 32 ~ 48kHz. You can also select the input source by pressing FUNCTION repeatedly on the front panel.
OPERATION
31