Radio Operation

Presetting the radio stations

You can preset 30 stations for FM and AM (MW). Before tuning, make sure that you have turned down the vol- ume.

1

Press BAND on the remote control or press

FUNCTION repeatedly on the front panel until

 

FM or AM (MW) appears in the display window.

2

And then every time you press BAND, FM and

AM (MW) changes alternately.

 

 

 

 

Press and hold TUNING

 

 

or

 

on

 

 

 

3 the front panel for about two seconds until the

frequency indication starts to change, then release.

Scanning stops when the DVD/CD Receiver tunes in a station. “TUNED” and “STEREO” (for stereo program) appear in the display window.

ote

TUNED” only appears when the signal is FM and

STEREO.

4

Press STOP/MEM. on the front panel.

A preset number will flash in the display window.

 

Press TUNING

 

 

or

 

 

on the front

 

 

 

 

5 panel to select the preset number you want.

 

Press STOP on the front panel again.

6 The station is stored.

 

 

 

 

7

Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUNING

 

 

 

 

or

 

repeatedly in step 3

 

 

 

 

to tune in the station manually.

 

 

 

To clear all the stored stations

Press and hold STOP/MEM. for about two seconds and “CLEAR ALL” is appeared in the display window and then press STOP/MEM. again, the stations are cleared.

If you have accidentally entered into the "CLEAR ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to normal mode.

ote

If all stations have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash.

To change the preset number, follow the steps 5-6 as above.

Listening to the radio

Preset radio stations in the DVD/CD receiver’s memory first (see “Presetting radio stations” on the left).

1

Press on the remote control BAND or press

FUNCTION repeatedly on the front panel until

AM (MW) or FM appears in the display window. The last received station is tuned in.

2 Press PRESET +/- repeatedly to select the pre- set station you want.

Each time you press the button, the DVD receiver tunes in one preset station at a time.

3 Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the remote control repeatedly.

To turn off the radio

Press POWER to turn the DVD/CD receiver off or select another function mode (CD/DVD, VIDEO1 or VIDEO2).

To listen to non-preset radio stations

Use manual or automatic tuning in step 2.

For manual tuning, press TUNING

 

or

 

on the front panel repeatedly.

 

 

For automatic tuning, press and hold TUNING

or for about two seconds on the front panel.

To select a preset radio station directly

You can use the number buttons on the remote control to select a preset radio station directly.

For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 then 9 (within 3 seconds).

For your reference

To improve reception

Reorient the supplied antennas.

30

Page 30
Image 30
LG Electronics LH-T1000 owner manual Radio Operation Presetting the radio stations, Listening to the radio